3m Fibre Optic Cable LC-ST orange 50/125 OM2

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat5e. Most cables are unshielded, relying on the twisted pair design for noise rejection, some are shielded. Often used in computer networks such as Ethernet. The specially designed Category 5e flat network cables are suitable for any application but are particularly useful for laying under carpets and flooring. Available in 3 colours grey, blue, black and a variety of lengths.
Read Less

24 PORT CAT 5E PUNCH DOWN PATCH PANEL Features Meets the TIA/EIA-568-B.2 Category 5E Channel Testing Performance requirements. Support T568 A&B wiring & Easy installation Dual IDC connector can accept 22-26 AWG solid and stranded UTP cables Compatible with 110 or Krone
Read Less

Network extension cable RJ45 Male to Female. Extend your ethernet cable 3m. CAT6 Pure copper cable Colour grey Length 3m
Read Less

CAT6A Ethernet Cable 25m Black 10GBase-T Pure Copper Category 6A Ethernet cable, commonly referred to as Cat6A, is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600MHz and is suitable for 10BASE-T, 100BASE-TX (Fast Ethernet), 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) and 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat6, Cat5e and Cat5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic and corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet, 10GE (also called 10GbE or 10 GigE) supports a data rate of 10Gbits/s (billion bits per second). S/FTP (or S/STP): Screened and Foil (Shielded) Twisted Pair. Each individual pair is screened by foil and features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device. This product has been tested and found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 and ANSI/TIA-568-C.2 IEC 60332-1-2, RoHS Compliant and 3P Verified
Read Less