3m Fibre Optic Cable LC-ST 62.5/125 OM1

CAT5e Ethernet Cable 2m Green UTP Stranded Full Copper 24 AWG UTP Cat5e Cable Length 1 meter Partially booted moulded RJ45 connectors Verified for Gigabit Ethernet Stranded full copper cable 24AWG x 4P Type CM (UL) CMH ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3P Colour green
Read Less

16 PORT CAT 6 PUNCH DOWN PATCH PANEL Features Meets the TIA/EIA-568-B.2-1 Category 6 Channel Testing Performance requirements. Support T568 A&B wiring & Easy installation Dual IDC connector can accept 22-26 AWG solid and stranded UTP cables Compatible with 110 or Krone Tools 19 inch rach mount 16 ports CAT6 modules
Read Less

RJ45 male to female extension cable Extend your network cable 10m. CAT5e pure copper cable Colour grey Length 10m
Read Less

25cm CAT6A Ethernet Cable Pink 10GBase-T Pure Copper Category 6A Ethernet cable, commonly referred to as Cat6A, is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600MHz and is suitable for 10BASE-T, 100BASE-TX (Fast Ethernet), 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) and 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat6, Cat5e and Cat5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic and corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet, 10GE (also called 10GbE or 10 GigE) supports a data rate of 10Gbits/s (billion bits per second). S/FTP (or S/STP): Screened and Foil (Shielded) Twisted Pair. Each individual pair is screened by foil and features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device This product has been tested and found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 and ANSI/TIA-568-C.2 IEC 60332-1-2, RoHS Compliant and 3P Verified
Read Less