10m Fibre Optic Cable LC-ST 62.5/125 OM1

10m ethernet network cable CAT6 UTP. CAT6 specification patch cable with moulded connectors. UTP unshielded twisted pair network cable. Suitable for 10BaseT, 100BaseTX and GigaBit Ethernet. RJ45 network plug each end. 1:1 wired for for connecting a PC to a hub, router, network switch, print server, patch panel, etc. Colour: Light grey.
Read Less

Network extension cable RJ45 Male to Female. Extend your ethernet cable 3m. CAT6 Pure copper cable Colour grey Length 3m
Read Less

500Mbos Homeplug Powerline Ethernet adapter, compliant with HomePlug AV specification 1.1 with a high speed transfer rate of up to 500 Mbps. The power line Ethernet adapters 56-Bit encryption with key management. A minimum of two Adapters are needed and more can be added as the network grows. Pass through function allows you to free up a power socket that would otherwise be taken by the homeplug. Please note that while homeplugs will work with most operating systems, the software bundled will only work on Windows based machines.
Read Less

10m CAT6A Patch Cable Blue 10GBase-T Pure Copper Category 6A Ethernet cable, commonly referred to as Cat6A, is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600MHz and is suitable for 10BASE-T, 100BASE-TX (Fast Ethernet), 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) and 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat6, Cat5e and Cat5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic and corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet, 10GE (also called 10GbE or 10 GigE) supports a data rate of 10Gbits/s (billion bits per second). S/FTP (or S/STP): Screened and Foil (Shielded) Twisted Pair. Each individual pair is screened by foil and features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device This product has been tested and found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 and ANSI/TIA-568-C.2 IEC 60332-1-2, RoHS Compliant and 3P Verified
Read Less