0.5m Fibre Optic Cable SC-SC 62.5/125 OM1

Ideal for home or office network connections 5 Metre Ethernet Cable Colour grey UTP (Unshielded Twisted Pair) CAT5e 100MHz Moulded Connectors 26AWG 4 Pair ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3P Full copper cable RJ45 Male to male Category 5e cable is a twisted pair high signal integrity data cable type often referred commonly known as CAT5e. Most cables are unshielded, relying on the twisted pair design for noise rejection. Ideal for use in home or office environments in computer networks such as Ethernet or to connect TVs and devices to routers
Read Less

RJ45 male to female extension cable Extend your network cable 5m. CAT5e pure copper cable Colour grey Length 5m
Read Less

The NL-HP555SG is compliant with HomePlug AV specification 1.1 and have a high speed transfer rate of up to 500 Mbps. The power line Ethernet adapters 56-Bit encryption with key management. A minimum of two Adapters are needed and more can be added as the network grows, the NL-HP555SG would make a perfect addition to any Home Plug network. Please note that while homeplugs will work with most operating systems, the software bundled will only work on Windows based machines.
Read Less

CAT6A Ethernet Cable 20m Violet 10GBase-T Pure Copper Category 6A Ethernet cable, commonly referred to as Cat6A, is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600MHz and is suitable for 10BASE-T, 100BASE-TX (Fast Ethernet), 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) and 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat6, Cat5e and Cat5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic and corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet, 10GE (also called 10GbE or 10 GigE) supports a data rate of 10Gbits/s (billion bits per second). S/FTP (or S/STP): Screened and Foil (Shielded) Twisted Pair. Each individual pair is screened by foil and features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device. This product has been tested and found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 and ANSI/TIA-568-C.2 IEC 60332-1-2, RoHS Compliant and 3P Verified
Read Less